Клуб rnessa.org-ФОРУМ


Сообщение:*
Код подтверждения*	5 - 1 = ? Напишите в окне решение примера Максимальное количество попыток: 10

Re: Давление масла

Заголовок темы: Re: Давление масла
Отправитель: Sem 14.02.2007 2:19:06

у меня есть фаст, но там таких данных ненашел
pnn30-502545

зато нашел мануал на ka24de
SERVICE DATA AND SPECIFICATIONS (SDS) KA24DE
Main journal diameter (Dm)
Grade No. 0 59.967 - 59.975 (2.3609 - 2.3612)
Grade No. 1 59.959 - 59.967 (2.3606 - 2.3609)
Grade No. 2 59.951 - 59.959 (2.3603 - 2.3606)
Pin journal diameter (Dp)
Grade No. 0 49.968 - 49.974 (1.9672 - 1.9675)
Grade No. 1 49.962 - 49.968 (1.9670 - 1.9672)
Grade No. 2 49.956 - 49.962 (1.9668 - 1.9670)
Center distance (r) 47.95 - 48.05 (1.8878 - 1.8917)
Standard Limit
Taper of journal and pin [A - B]
Journal — 0.01 (0.0004)
Pin — 0.005 (0.0002))
Out-of-round of journal and pin [X - Y]
Journal — 0.01 (0.0004)
Pin — 0.005 (0.0002)
Runout [TIR]* — 0.10 (0.0039)
Free end play 0.05 - 0.18 (0.0020 - 0.0071) 0.3 (0.012)
Fillet roil More than 0.1 (0.004)
Bearing Clearance
NEEM0117
Unit: mm (in)
Standard Limit
Main bearing clearance 0.020 - 0.047 (0.0008 - 0.0019) 0.1 (0.004)
Connecting rod bearing clearance 0.010 - 0.035 (0.0004 - 0.0014) 0.09 (0.0035)
Available Main Bearing
NEEM0118
STANDARD
NEEM0118S01
Unit: mm (in)
Grade number Thickness Identification color
0 1.821 - 1.825 (0.0717 - 0.0719) Black
1 1.825 - 1.829 (0.0719 - 0.0720) Brown
2 1.829 - 1.833 (0.0720 - 0.0722) Green
3 1.833 - 1.837 (0.0722 - 0.0723) Yellow
4 1.837 - 1.841 (0.0723 - 0.0725) Blue
UNDERSIZE (SERVICE)
NEEM0118S02
Unit: mm (in)
Thickness Main journal diameter “Dm”
0.25 (0.0098) 1.952 - 1.960 (0.0769 - 0.0772) Grind so that bearing clearance is the specified
value.
Available Connecting Rod Bearing
NEEM0119
STANDARD
NEEM0119S01
Unit: mm (in)
Grade number Thickness Identification color
0 1.505 - 1.508 (0.0593 - 0.0594) —
1 1.508 - 1.511 (0.0594 - 0.0595) Brown
2 1.511 - 1.514 (0.0595 - 0.0596) Green
UNDERSIZE (SERVICE)
NEEM0119S02
Unit: mm (in)
Thickness Crank pin journal diameter “Dp”
0.08 (0.0031) 1.540 - 1.548 (0.0606 - 0.0609)
Grind so that bearing clearance is the specified
value.
0.12 (0.0047) 1.560 - 1.568 (0.0614 - 0.0617)
0.25 (0.0098) 1.625 - 1.633 (0.0640 - 0.0643)
Miscellaneous Components
NEEM0120
Unit: mm (in)
Camshaft sprocket runout [TIR]* Less than 0.15 (0.0059)
Flywheel runout [TIR]* Less than 0.15 (0.006)
Drive plate runout [TIR]* Less than 0.15 (0.006)

		Nissan R'nessa КЛУБ